1962 Spaulding 33

"Pegasus" is number 6 of 9 built. Lovingly maintained by her second owners with many recent interior upgrades, all in keeping with her classic pedigree and character.
She is fractionally rigged and keel stepped on a lead keel. Plywood hull, which makes her fast and dry. The solid teak cabin house is almost 2" thick!

Sleeps 6 in two quarter berths, salon and v-berth, all with new blue-gray velour on natural foam rubber cushions. Low-hour Yanmar diesel and recent rewiring of electrical systems. New Sunbrella full tent cover. New holding tank that has never been used, and a nearly bone dry bilge.
This boat has been well maintained since new, never needing a restoration.

The Spaulding 33's are the only ply-wood hulled boats admitted into The Master Mariner's Society.
Financial set-back is forcing the sale of this boat that we had planned on keeping for life.

$19,000.00 o.b.o., and we will consider financing to the right buyer.

Email Contact: fourquinns@gmail.com

   

31ft ALDEN Project Boat

ALDEN 31, Built in 1968
Berthed in Sausalito
Crony, a wooden boat under re-fit, a project not for the faint of heart! 2 cylinder Volvo engine, low mileage, lots of hardware. Beautiful lines. $999 or BO.

Cap't Doug Workmaster
1whiskeyromeo@gmail.com

14' 6' Iain Oughtred designed Whilly boat

 

SOLD

"Luigi" is derived from traditional Norwegian small craft, this handsome double-ender is a great rowboat and a surprisingly fast daysailer ideal for the bay or nearby lakes.

She is glued lapstrake construction, built in 2005. Okoume marine plywood planking on a Honduras mahogany backbone, fastened with West System epoxy and silicon bronze screws. Thwarts, floors, centerboard, and trim are mahogany and cherry. Mast, gaff and boom are spruce. Includes main sail, rigging, oars and an almost new EZLoader trailer.

I have sailed and rowed her around Alameda for many wonderful years, but now my other wooden boat is taking up all of my "project" time. Hope to find a family that will enjoy her.

Asking $ 2,500.00 

Contact: craig@spauldingcenter.org

 

19' Alpha Dory

SOLD

Alpha Dory designed by Garden and built by Williams of teak and marine ply.

A 19’ beach launched dory that can be sailed, rowed or driven by outboard. Bottom planked with 1 ½” teak. With a centerboard and a wide beam this is a heavy, very stable dory for Bay conditions.

Sailing rig is new. Hollow spar is lightweight Sitka spruce “bird’s mouth” construction. All hardware and fittings were hand built and galvanized. Sails were built by Hogin 2012.

The dory was pulled last week for maintenance. All seams were reefed out and new cotton driven in. New paint throughout and a dry boat.

This has been a very fun boat for my family because of its versatility and ease of just stepping aboard for an afternoon’s sail.The dory is located in Alameda.

Asking $2000. 

If interested, all questions should be emailed to race801@gmail.com 

Bird Boat #22

Hummingbird is for sale!
After extensive rebuilding Hummingbird is a tough fast bay area classic. Built in 1932 she is the only George Knease bird boats left and one of 6 regularly sailing the bay. She is fast powerful and elegant, yet easily single handed.
As of June 2012 when she was last hauled she has new topside and bottom paint, all of her seams were reefed, re-cottoned and payed with seam compound. All of her planking is now bronze fastened. She had 5 planks replaced and while she bare wood all planking was checked repaired where necessary. (I have sample fasteners for inspection). Her decks have been replaced including her aft deck which is now laid teak. She has a new stem, transom and all ribs have been replaced.
Her mast, boom standing rigging and running rigging are in great shape, they include tiller extension and self tailing main winch. Her Pineapple sails have less than 2 seasons on them. She has a new battery and auto bilge pump however she does not take on any water.
I have some of her original parts and she retains some original woodwork. She is a great model of one of the oldest one design classes on the west coast.

She can be viewed by calling 510 282 6506.

Asking $20,000, or reasonable offer.

1936 Alden Cutter

Lovely John G. Alden designed one of a kind Cutter.
Built in 1936 in the Palmer Johnson Shipyard. The hull and deck house are built of mahogany the decks are teak. 36 feet on deck, she has a full compliment of sails and several extras as well. I can stand up in the cabin and am slightly over six feet tall. The deck house is divided into an aft pilot's berth, which sleeps two, the main salon which sleeps five, the galley, a forward storage area, and the head. There are separate entrances to the pilot's berth and the main salon, so that the crew can go up on deck with out disturbing the rest of the pilots.

She has had a fairly recent haul out and survey which found her to be sound. We were fitting her out for an electric engine because the original atomic four was no longer functional and we did not want to stick with a gasoline engine on a wooden boat. So included in the sale would be eight 80 AH AGM batteries, and one 100 AH AGM as well as a couple of deep cycle marine batteries, all in solid working condition.
She is a beautiful boat who needs a bit of love to make her truly shine. The bulwark has some dry rot and needs to be repaired/replaced, but the rot does not extend to the shear plank and is thus more cosmetic than structural. She needs some painting and varnishing, but the hull is sound and she is in remarkable condition for her age. Sale includes the original Kelvin and White compass which mounts in the binnacle and is gently illuminated by an indirect red light and is a piece of art in itself. She is berthed in Moss Landing.

Please email Jack with any questions, to arrange a time to see her or to request more photographs. There are many photos, but they do not do her justice, you really must go aboard to fully appreciate her.. She is a one of a kind sailing vessel designed and built by masters in a time when ship building was still the purview of sailors.

Asking $13,000 OBO. 

Contact information:  Email Jack at nox753@gmail.com

A 13.5 ft beauty by Steve Najjar

SOLD











Amazing, never used, collector item!

Gaff rigged at 13.5 ft overall, 4.7ft beam and 3ft draft with daggerboard.

1996 built by the fine boatbuilder, Steve Najjar.

This boat "Lealand" is in Bristol condition, and was recently donated to the Spaulding Wooden Boat Center. It is a collector's item, the real value is $24,000 we are letting it go for $10,000.
Comes with a new trailer, all the spars, sails, lines and two sets of oars.

You should come and see it, one of a kind.

Contact Andrea, Associate Director at Spaulding Center www.spauldingcenter.org